GRP Pultruded Structural Profiles
Engineered Composites supplies an extensive range of glass fibre reinforced pultruded structural profiles from stock.
The GRP profile sections are made from glass reinforced isophthalic polyester resin with a polyester surface veil. This combination gives excellent corrosion resistance and weatherability at an economic cost. Profiles in other resin systems are available to order. The standard BS EN 13706 – Specification for Pultruded Profiles, defines two grades of structural profiles. All Engineered Composites structural profiles with a wall thickness of over 5mm thick meet the higher performance E23 grade while those at 3-5mm wall meets the E17 grade.
GRP Pultruded Structural Profile Product Range
The following pultruded profiles are carried as stock items in 6m lengths for immediate delivery. The stock lengths can be cut to length if required Other sizes, shapes, lengths, colours and resins can be supplied to order with a typical minimum production order of 300m.
Flat strip |
Width (w)
mm |
Thickness (t)
mm |
Weight
kg/m |
Colour |
80 |
8 |
1.15 |
G |
Angle |
Leg length
(L1) mm |
Leg length
(L2) mm |
Thickness (t)
mm |
Weight
kg/m |
Colour |
25 |
25 |
3 |
0,52 |
G |
50 |
50 |
3 |
0,52 |
G |
50 |
50 |
5 |
0.86 |
G |
51 |
51 |
6.35 |
1.08 |
G |
60 |
60 |
8 |
1.61 |
G |
75 |
75 |
10 |
2.40 |
G |
100 |
100 |
8 |
2.76 |
G |
U Channel |
Width (w)
mm |
Leg length (L)
mm |
Thickness (t)
mm |
Weight
kg/m |
Colour |
50 |
30 |
4 |
0.75 |
G |
76 |
25 |
6.35 |
1.10 |
G |
100 |
50 |
6 |
2.03 |
G |
150 |
50 |
6 |
2.57 |
G |
200 |
60 |
9.5 |
5.59 |
G |
280 |
70 |
12.5 |
9.17 |
G |
Box Sections |
Side (b1)
mm |
Side (b2)
mm |
Thickness (t)
mm |
Weight
kg/m |
Colour |
25 |
25 |
3 |
0.48 |
G |
38 |
38 |
3.2 |
0.51 |
G & Y |
38 |
38 |
5 |
1.19 |
G & Y |
44 |
44 |
6 |
1.64 |
G & Y |
51 |
51 |
3.25 |
1.10 |
G & Y |
51 |
51 |
6.35 |
2.1 |
G & Y |
60 |
60 |
4.5 |
1.8 |
G & Y |
76 |
76 |
6.35 |
3.48 |
G |
100 |
50 |
6.35/3.25 |
2.15 |
G |
I beam |
Width (w)
mm |
Height (h)
mm |
Thickness (t)
mm |
Weight
kg/m |
Colour |
30 |
40 |
2 |
0.40 |
W |
70 |
120 |
8 |
3.67 |
G |
100 |
200 |
9.5 |
9.17 |
G |
Handrail profiles |
|
Dimensions
mm |
Weight
kg/m |
Colour |
Handrail profile |
76 x 50 |
1.31 |
G & Y |
Knee rail tube |
38 od x32 id |
0.62 |
G & Y |
Toe rail (Kick
plate) |
150 x 3 |
1.14 |
G & Y |
Ladder Rung (round ribbed) |
Outside(ribbed)
dia (d1) mm |
Inside dia
(d2) mm |
Thickness (t)
mm |
Weight
kg/m |
Colour |
34.5 |
25.5 |
3.25 |
0.73 |
G & Y |
Uni-Strut type profile |
Width "w"
mm |
Height "h"
mm |
Thickness (t)
mm |
Weight
kg/m |
Colour |
41.5 |
41.5 |
3.5 |
0.82 |
G |
35 |
23 |
4.5 |
0.8 |
G |
Interlocking Decking Plank
DECK500 |
Cover Width "w"
mm |
Height "h"
mm |
Thickness (t)
mm |
Weight
kg/m |
Colour |
500 |
40 |
4.5 |
0.87 |
G |
Technical data
The table below shows the minimum properties to comply
with the two grades defined in the BS EN 13706.
|
Units |
Property Data |
|
|
E 23 Grade |
E 17 Grade |
Full section modulus |
GPa |
23 |
17 |
Tensile strength (axial) |
MPa |
240 |
170 |
Tensile strength (transverse) |
MPa |
50 |
30 |
Tensile Modulus (axial) |
GPa |
23 |
17 |
Tensile Modulus (transverse) |
GPa |
7 |
5 |
Flexural strength (axial) |
MPa |
240 |
170 |
Flexural strength (transverse) |
MPa |
100 |
70 |
Inter-laminar shear |
MPa |
25 |
15 |
Pin bearing strength |
MPa |
70 |
50 |
|
