About

The non-conductive, lightweight properties of GRP fencing make it a highly effective alternative to traditional steel fencing, whilst still maintaining the strength.

It is highly beneficial in areas such as railways, electrical substations, electrical enclosures and chemical sites.

  • GRP boundary fencing
  • GRP trackside fencing
  • GRP electrical enclosures
  • GRP chemical enclosures
  • GRP gas enclosures

GRP Palisade Fence Panel

GRP Pales independently tested & comply with the requirements of BS 1722-12:2016 for General Purpose Fences & comply with BS EN 13706, either E17 or E23

We have three standard sizes of Palisade Fence Panels:
(click images below to view)

1.8m
2.4m
3.0m
Standard Fence Panels Standard Post Lengths (mm)
Height (mm) Width (mm) Embedded Surface Mounted
1800 2720 2325 1800
2400 2720 3125 2400
3000 2720 3925 3000

Fence Panels are supplied in Kit form to be assembled. This saves on high carriage costs.
All the fence profiles are pre-drilled for easy assembly, removing the need for jigs and enabling assembly on site.
Fence Posts are supplied pre-drilled with the required cleats.
Embedded Posts include GRP Rebar which is embedded into the concrete to act as a key.
Surface mounted posts can be supplied with a metal foot and end cap.

Additional Components

– Supports
– Fence Panel Fixing Pack
– Fence Post Fixing Pack
– Pack of 4 Corner Cleats (2x right hand & 2x left hand)
– Fish Plates (10 mm)

GRP Standard Palisade Gates

Double Gates
Height Width
1.8m 4m
2.4m 4m
3m 4m
1.8m 6m
2.4m 6m
3m 6m
Single Gates
Height Width
1.8m 1m
2.4m 1m
3m 1m
1.8m 1.2m
2.4m 1.2m
3m 1.2m

Accessories

– Hinges
– Latches
– Drop Bolt
– Support Wheels

GRP Bespoke Palisade Gates

Please contact us on 01244 676000 or info@engineered-composites.co.uk with your requirements for bespoke gates.

Mesh Fencing

Mesh Fencing is versatile and easy to construct. It is used in many industrial situations such as Utility Screens, Machine Guard Fencing, Platform Fencing, and in many other industrial situations where the benefits of GRP provide the solution.

These benefits are that GRP Mesh fencing is light weight, non conductive, radar transparent, electromagnetically transparent and non corrosive. It is also very strong.

Mesh Fencing can be made to any size of panel you require as well as Gates. It is therefore a very flexible solution.

Standard panels are available which are as follows:-

Standard Fence Panels Standard Post Lengths (mm)
Height (mm) Width (mm) Embedded (mm) Surface Mounted (mm)
2000 3000 2625 2000
2400 2000 3125 2400
3000 3000 3925 3000

All Fence Panels and Gates are supplied in Kit form.

2000mm x 3000mm
2400mm x 2000mm
3000mm x 3000mm

GRP Bespoke Mesh Fencing and Gates

Please contact us on 01244 676000 or info@engineered-composites.co.uk with your requirements for bespoke fencing and gates.

Barbican Fencing

Please contact us on 01244 676000 or info@engineered-composites.co.uk with your requirements for bespoke Barbican Fencing and Gates.

BSEN13706 Specification for Pultruded Profiles defines two grades of structural profiles. Our structural profiles with a wall thickness of over 5mm meet the higher performance E23 grade, while those at 3-5mm thick meet the E17 grade. Please view our Technical Data Table below for further specifications.

Units Property Data Property Data
E 23 Grade E 17 Grade
Full section modulus GPa 23 17
Tensile strength (axial) MPa 240 170
Tensile strength (transverse) MPa 50 30
Tensile Modulus (axial) GPa 23 17
Tensile Modulus (transverse) GPa 7 5
Flexural strength (axial) MPa 240 170
Flexural strength (transverse) MPa 100 70
Inter-laminar shear MPa 25 15
Pin bearing strength MPa 70 50

Additional Generic Physical Property Data

Property Units typical value
Density g/cm 3 1.9
Barcol Hardness 3 50
Water Absorption % 1.0 max
Electrical Strength kV/mm 5-10
Coeff. of thermal expansion deg C x 10 -6 6-10
Coeff. of thermal conductivity W/m deg C 0.3-0.35

All our GRP Profiles comply with BS EN 13706- Reinforced plastics composites specification for pultruded profiles.

Palisade Fencing

Our Pales have been independently tested & comply with the requirements for BS 1722-12:2016
Our system has also been independently tested & complies with the pull out test for BS 1722-12:2016

– Fire retardant to BS476
– Pt7 Class 1
– Pt7 Class 2
– Low smoke
– Low toxicity

Other Points
– Price dependant on volume
– Next day delivery in most cases